Shopping security
Product Description
This three connectors serial bus smart servo possess 35KG torque and adopts all-metal gears inside, strong and durable. It can be controlled by serial port commands, connected to multiple servos at the same time, which can help us create robotic arms and bionic robots. Compared with ordinary servos on the market, it can read back the angle and faceback voltage, temperature position parameter.
Packing List
| Weight | 64g |
| Size | 40 x 20 x 40.5 mm |
| Working voltage | 9-12.6V |
| Speed | 0.18sec/60°11.1V |
| Torque | 35kg.cm 11.1V |
| Rotation | 0-240° |
| No-load current | 100mA |
| Stall Current | 3A |
| Servo accuracy | 0.2° |
| Control method | UART serial command |
| Communication baud rate | 115200 |
| Storage | Save data when the power off |
| Servo ID | 0~253 for user setting, ID 1 is default |
| Angel read back function | Support |
| Protection | Avoid stalling and overheat |
| Data feedback | Temperature, Voltage, Position |
| Working mode | Servo mode and deceleration motor mode |
| Control angle range | 0-1000, correspond to 0-240 |
| Wire | 200mm |
| Gear | Metal |
ID Setup & Serial Communication
The user can set and assign an ID number to each servo, and use the controller to issue instructions to make the servo perform actions according to the instructions.
High-voltage Servo and 35KG Large Torque
The 11.1V high-voltage servo can reduce the current by more than 60% and improve the battery life. 35kg of large torque gives your robot plenty of power.
High Quality Potentiometer
The servo adopts a high-precision potentiometer, which improves the accuracy and linearity, makes the operation more stable and prolongs the service life.
Intelligent Feedback and Two Working Modes
The servo supports servo mode and reduction motor mode, and has position, temperature and voltage feedback to protect the normal operation of the servo.
| Item | Specification |
| Weight | 64g |
| Size | 40*20*40.5mm |
| Working voltage | 9-12.6V |
| Speed | 0.18sec/60°11.1V |
| Torque | 35kg.cm 11.1V |
| Rotation | 0-240° |
| No-load current | 100mA |
| Stall Current | 3A |
| Servo accuracy | 0.2° |
| Control method | UART serial command |
| Communication baud rate | 115200 |
| Storage | Save data when the power off |
| Servo ID | 0~253 for user setting, ID 1 is default |
| Angel read back function | Support |
| Protection | Avoid stalling and overheat |
| Data feedback | Temperature, Voltage, Position |
| Working mode | Servo mode and deceleration motor mode |
| Control angle range | 0-1000, correspond to 0-240 |
| Wire | 200mm |
| Gear | Metal |
Ships within 48 hours · Estimated delivery Jun 26 - Jul 1
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order