8 GPM 3500 psi Smoking' hot Bandit Comet pump Honda GX690 smoking' Bandit series hot water pressure washer

 Heavy duty powder coated frame 41″l x 43″w x 41″h 675 lbs. Top to bottom schedule 80 coil for maximum temperature rise corrosion resistant stainless steel coil wrap 12 gallon aluminum diesel and gasoline fuel tanks key start Honda engine must supply your own battery and battery box must supply your own bypass hose and bypass barb on the unloader belt driven TW8030S Comet pump with a 1 year 'bumper to bumper' warranty on the entire pump includes wear items Beckett burner stainless steel control panel with adjustable temperature control (keep it under 180 degrees) 4-groove" Bandit" belt for uniform tension and maximum power transfer EZ-line belt tension system easy access two price belt guard can be removed and installed easy pump and engine oil drains over pressure and thermal relief protection we recommend that you plumb this unit to a minimum of a 200 gallon water tank or 275 gallon IBC tote, included with the skid: gun/wand assembly with insulated wand and quick connects 50′ high pressure hose w/quick connects chemical injector assembly w/quick connects 4 color-coded qc spray nozzles 1 color-coded QC chemical nozzle we strongly recommend that you purchase our PL-8-TA or PL-8-TO kit which has almost everything you need to correctly plumb this unit.

You will need to add a 1/2" hose barb (4784) and at least 12' or more of a 3/8" yellow ag hose to plumb your bypass hose back to the tank (AGY06). Upsizing the hose IDs will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well, and move much faster when using your surface cleaner. The PL-8-TA or PL-8-TO kit has (almost) everything you need to plumb the pressure washer as well as connect to a reel including the 50' high-pressure hose. Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying, and supply enough water to your pump using the 'double your supply hose ID about your inlet port' rule and keep your pump cooler leading to less downtime. Double-check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4".

Always use medium thread lock on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles. Are you tired of releasing the gun trigger to watch the pressure build up in the high-pressure hose, gun, wand, quick connects, and O-rings? Tired of your pump going into bypass because another O-ring failed, and you need to replace the plug and/or coupler? Do you want a smooth action when you pull your gun trigger? Are you struggling with moving your stiff pressure washer hose? Do you need to place a death grip on your ladder when you pull the trigger on your gun to prevent falling? This skid can be ordered with a flow-actuated K7.3 unloader to make your pressure-washing experience easier on your body! If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold. We recommend the whisper wash 19" classic (4345), 24" ground force (6715), 24" Lil' Big Guy, or maybe the 28" Big Guy for use with this 8 GPM hot skid. Using a larger diameter surface cleaner will cause the user to move more slowly than if using the 19"-24" unit. 

Can not be shipped inside the state of California 

 SKU: PW.BSH8035HC